Academy topic
Ceramic, nanostructure & product profiles
How protection systems bond to paint, covalent adhesion, and product manuals.
Application protocol
What happens chemically between layers
- What happens chemically between base coat and top coat — and why a narrow time window exists.
8 minread
Expert guide
What a high spot is — physically
- What a high spot is exactly — and why it is not a “smear” but a polymer island.
12 minread
Application protocol
Three variables that decide
- Why ceramic is not like facade paint — “if it is not raining, we can apply”.
10 minread
Technology
What “matte” is optically
Standard ceramic turns matte paint glossy. If you have factory matte or satin clear coat (BMW Frozen, AMG Magno, Audi Plasma…), never use standard Ceramic V3 / Ultra / Lite. Use only FEYNLAB® `Matte Ceramic`.
9 minread
Technology
TPU + plasticisers: why PPF is “soft”
- Why standard ceramic cracks on PPF — TPU plasticisers vs rigid Si–O–Si network.
9 minread
Buying guide
True Series (DIY): consumer line without mandatory IR
- Three FEYNLAB® ceramic categories: True Series (DIY), Protection Series (Pro), and maintenance line.
10 minread
Expert guide
Structural backbone of modern ceramics
- Real structural backbone of modern ceramics: SiO₂ + Si₃N₄ + SiC.
9 minread
Technology
Cross-section: four layers in one composite
- What PPF Flex is made of layer by layer and why order matters.
10 minread
Technology
Two isocyanate types, two fates
- Why aromatic TPU (MDI/TDI) yellows after a few years while aliphatic (HDI) stays transparent for a decade.
9 minread
How-to guide
Four defect types under PPF
- How to tell water vs air bubbles under PPF — they look alike, one fades, one does not.
12 minread
How-to guide
What pressurised water does to a PPF edge
- Why pressure washing can lift PPF edges and where the safety limit is.
8 minread
Technology
Clear coat is not a “smooth pane of glass”
- Why clear coat is not smooth at the molecular level — and what that means for adhesion.
9 minread
How-to guide
Curing
Ceramic systems need time for chemical maturation. For the first 24–48 hours, be most careful: minimise contact with water, dust, and chemical stages. Always confirm specific windows in the product manual for that coatin
6 minread
Research
Physical vs chemical adhesion
- The difference between physical adhesion and covalent bonding — and why it matters.
11 minread
Product manual
Where Ceramic V3 sits in the portfolio
Ceramic V3 belongs to the True Series — premium DIY / prosumer line focused on performance and predictable workflow. It is not meant to replace Pro Series studio installs, but as the top consumer line for customers who c
12 minread
Technology
What self-healing is
- What self-healing actually is in polymer chemistry — and what it does not do.
6 minread